MODEL:SKS-250T Single Output Switching Power Supply |
Features:
High efficiency,high reliability,low cost
Universal AC input /full range
100% full load burn-in test
Protections: Short circuit/ Over load/ Over voltage
Forced air cooling by built in DC fan
Built-in cooling Fan ON-OFF control
1 year warranty
Dimensions: 215*115*50mm(L*W*H) |

casing No. : H007T |
|
|
MODEL |
SKS-250T-5 |
SKS-250T-7.5 |
SKS-250T-12 |
SKS-250T-13.5 |
SKS-250T-15 |
SKS-250T-24 |
SKS-250T-27 |
SKS-250T-48 |
|
OUTPUT |
DC Voltage |
5V |
7.5V |
12V |
13.5V |
15V |
24V |
27V |
48V |
|
Voltage Tolerance |
¡À2% |
¡À2% |
¡À1% |
¡À1% |
¡À1% |
¡À1% |
¡À1% |
¡À1% |
|
Rated Current |
40A |
30A |
20A |
18.5A |
16.6A |
10A |
9.3A |
5.2A |
|
Current Range |
0-40A |
0-30A |
0-20A |
0-18.5A |
0-16.6A |
0-10A |
0-9.3A |
0-5.2A |
|
Rated Power |
200W |
225W |
240W |
250W |
249W |
240W |
251W |
250W |
|
Ripple & Noise |
120mVp-p |
120mVp-p |
150mVp-p |
150mVp-p |
150mVp-p |
150mVp-p |
200mVp-p |
240mVp-p |
|
DC Adjustment Range |
-10%,+12% |
¡À20% |
-16%,+10% |
-12%,+11% |
-10%,+20% |
-16%,+10% |
-4%,+18% |
-15%,+17% |
|
Setup, Rise, Hold Time |
200ms,50ms,20ms at full load |
|
INPUT |
Voltage Range |
90¡«132 VAC/180¡«264VAC47¡«63 Hz; Selected by switch 254¡«370VDC |
|
AC Current |
5.5A/115 V 3.5A/ 230 V |
|
Efficiency |
74% |
76% |
78% |
79% |
78% |
82% |
82% |
83% |
|
Inrush Current |
25A/115V50A/230V |
|
Leakage Current |
£¼3.5 mA/240VAC |
|
PROTECTION |
Over Load |
105%¡«135% |
|
Protection type: Current limiting, recovers automatically after fault condition is removed.
|
|
Over Voltage |
115%¡«135% |
|
Protection type:Voltage limits, automatic resume troubleshooting. |
|
Over Temp. |
RTH3¡Ý45¡æFAN ON ¡Ü40¡æFAN OFF,¡Ý85¡æoutput shutdown |
|
ENVIRONMENT |
Working Temp., Humidity |
-10¡æ¡«+50¡æ; 20%¡«90 %RH |
|
Storage Temp., Humidity |
-20¡æ¡«+85¡æ; 10%¡«95 %RH |
|
Vibration |
10¡«500Hz£¬2G 10min./1cycle, period for 60min, each along X, Y, Z axes |
|
SAFETY |
Withstand Voltage |
I/P-O/P:1.5KVAC I/P-O/P:1.5KVAC O/P-FG: 0.5KVAC |
|
Isolation Resistance |
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC |
|
STANDARD |
Safety Standard |
Design refer to UL1950 |
|
EMC Standard |
Design refer to EN55022£¬EN55024£¬EN61000 |
|
OTHERS |
Weight |
1.15Kg |
|
Packing |
12pcs/13.8Kg/0.98CUFT |
|
NOTE |
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25¡æ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12¡åtwisted pair-wire terminated with a 0.1¦Ì & 47¦Ì parallel capacitor.
3.Tolerance: includes set up tolerance, line regulation and load regulation.
|

|