|
|||||||||||||||||||||||||||||||||||||||
MODEL:HSM-50 Single Output Switching Power Supply |
||||||
| ||||||
|
MODEL |
HSM-50-12 |
HSM-50-15 |
HSM-50-24 | |||
|
OUTPUT |
DC Voltage |
12V |
15V |
24V | ||
|
Voltage Tolerance |
¡À1% |
¡À1% |
¡À1% | |||
|
Rated Current |
4.2A |
3.4A |
2.1A | |||
|
Current Range |
0-4.2A |
0-3.4A |
0-2.1A | |||
|
Rated Power |
50.4W |
51W |
50.4W | |||
|
Ripple & Noise |
120mVp-p |
120mVp-p |
200mVp-p | |||
|
DC Adjustment Range |
¡À10% |
¡À10% |
¡À10% | |||
|
Setup, Rise, Hold Time |
200ms,100ms,20ms at full load | |||||
|
INPUT |
Voltage Range |
AC 170¡«264VAC 47¡«63 Hz£»DC 240¡«370VDC | ||||
|
AC Current |
0.65A/ 230 V | |||||
|
Efficiency |
82% |
82% |
84% | |||
|
Inrush Current |
Cold start 36A/230V | |||||
|
Leakage Current |
£¼1 mA/240VAC | |||||
|
PROTECTION |
Over Load |
110%¡«160% | ||||
| Protection: Constant current limiting, recovers automatically after fault condition is removed | ||||||
|
ENVIRONMENT |
Working Temp., Humidity |
-10¡æ¡«+60¡æ£»20%¡«90 %RH (Refer to output load derating curve) | ||||
|
Storage Temp., Humidity |
-20¡æ¡«+85¡æ£»10%¡«95 %RH | |||||
|
Vibration |
10¡«500Hz£¬2G 10min./1cycle, period for 60min, each along X, Y, Z axes | |||||
|
SAFETY |
Withstand Voltage |
I/P-O/P:1.5KVAC I/P-O/P:1.5KVAC O/P-FG: 0.5KVAC | ||||
|
Isolation Resistance |
I/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC | |||||
|
STANDARD |
Safety Standard |
Design refer to UL1012 | ||||
|
EMC Standard |
Design refer to EN55022 CLASS A | |||||
|
OTHERS |
Weight |
0.27Kg | ||||
|
Packing |
45pcs/12.8Kg/0.99CUFT | |||||
|
NOTE |
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25¡æ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12¡åtwisted pair-wire terminated with a 0.1¦Ì & 47¦Ì parallel capacitor. 3.Tolerance: includes set up tolerance, line regulation and load regulation. | |||||
