Company
Product
Contact
Chinese

Products
       At first from material and material supplier after a rigorous selection process, we choice all right         components for each items, we have advanced workshop, quality control system, specially custom         design engineers. OEM/ODM is welcome and can be done in donghua.
MODEL:HPSP-1500 With PFC and Parallel Function Switching Power Supply

Features:
¡¤ High efficiency, high reliability
¡¤ AC input inrush current limiting
¡¤ Built-in active PFC function, PF>0.95
¡¤ Protections: Short circuit/ Over load/ Over voltage/ Over    temperature
¡¤ Built-in constant current limiting circuit
¡¤ Built-in remote ON-OFF control and remote sense function
¡¤ 3 years warranty
¡¤ Dimensions: 278*129*190.5mm£¨L*W*H£©

casing No. : H026

MODEL

HPSP-500-5

HPSP-500-12

HPSP-500-13.5

 HPSP-500-15 HPSP-500-24 HPSP-500-27 HPSP-500-48

OUTPUT

DC Voltage

5V

12V

13.5V

15V

24V

27V

48V

Voltage Tolerance

¡À6.0%

¡À3.0%

¡À2.0%

¡À2.0%

¡À1.0%

¡À1.0%

¡À1.0%

Rated Current

217.5A

112.5A

100.5A

90A

56.4A

50.4A

28.5A

Current Range

0-217.5A

0-112.5A

0-100.5A

0-90A

0-56.4A

0-50.4A

0-28.5A

Rated Power

1087.5W

1350W

1356.75W

1350W

1353.6W

1360.8W

1368W

Peak Value Power

1200W

1500W

1500W

1500W

1500W

1500W

1500W

Ripple & Noise

100mVp-p

150mVp-p

150mVp-p

150mVp-p

150mVp-p

150mVp-p

200mVp-p

DC Adjustment Range

-5%,+10%

-17%,+10%

¡À11%

-10%,+20%

-17%,+10%

¡À11%

-15%,+17%

Setup, Rise, Hold Time

1.5s,50ms,15ms/230VAC at full load

INPUT

Voltage Range

176¡«264 VAC 47-63Hz£»248¡«370VDC

Power Factor

PF>0.95/230VAC at full load

AC Current

10.5A/230 VAC

Efficiency

77%

84%

84%

84%

85%

85%

86%

Inrush Current

Cold start 100A/230VAC

Leakage Current

<3.5mA/240VAC

PROTECTION

Over Load

115%~140%

Protection: Constant current limiting, recovers automatically after fault condition is removed

Over Voltage

115%¡«135%

Protection type: Shut down o/p voltage, re-power on to recover

Over Temp

95 (TSW1) Detect on the heatsink of PFC MOSFET 90 (TSW2) Detect the winding of output choke

Protection:Shut down o/p voltage, recovers automatically after temperature goes down

FUNCTION

Remote Control

RC+/RC-£º0~0.8V Power on, 4~10V Power off, sink current <30mA

ENVIRONMENT

Working Temp., Humidity

-10¡æ¡«+65¡æ£»20%¡«90 %RH

Storage Temp., Humidity

-20¡æ¡«+85¡æ£»10%¡«95 %RH

Vibration

10¡«500Hz£¬2G 10min./1cycle, period for 60min, each along X, Y, Z axes

SAFETY

Withstand Voltage

I/P-O/P:3KVAC I/P-O/P:1.5KVAC O/P-FG: 0.5KVAC

Isolation Resistance

I/P-O/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC

STANDARD

Safety Standard

Design refer to UL1950,TUV EN60950

EMC Standard

Design refer to EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11;ENV50204,EN55024

OTHERS

Weight

7.4Kg

Packing

2pcs/15.5Kg/1.28 CUFT

NOTE
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25¡æ of ambient temperature.
2.Ripple & noise are measured at 20MHz of bandwidth by using a 12¡åtwisted pair-wire terminated with a 0.1¦Ì &47¦Ì
   parallel capacitor.
3.Tolerance: includes set up tolerance, line regulation and load regulation.
4.10% Duty cycle maximum within every 30 seconds(max.). Average output power should not exceed the rated power.
5.The power supply is considered a component which will be installed into a final equipment. The final equipment must
   be re-confirmed that it still meets EMC directives.