| SPECIFICATIONS |
|
| |
|
| INPUT |
|
| Voltage Range |
85～264 VAC47～63 Hz；120～370VDC |
| AC Current |
2A/115 V 1A/ 230 V |
| Efficiency |
73%(SKS-60-5); 76%(SKS-60-12); 77%(SKS-60-15); 79%(SKS-60-24); 80%(SKS-60-48); |
| Inrush Current |
Cold start 30A/115VAC 60A/230VAC |
| Leakage Current |
＜3.5 mA/240VAC |
| |
|
| OUTPUT |
See Datasheet |
| |
|
| PROTECTION |
|
| Over Load |
135%～165% |
| |
Protection type: Fold back current limiting, recovers automatically after fault condition is removed. |
| Over Voltage |
115%～135% |
| |
Protection type: hiccup mode, recovers automatically after fault condition is removed. |
| |
|
| ENVIRONMENT |
|
| Working Temp., Humidity |
-10℃～+60℃；20%～90 %RH |
| Storage Temp., Humidity |
-20℃～+85℃；10%～95 %RH |
| Vibration |
10～500Hz，2G 10min./1cycle，period for 60min, each long X, Y, Z, axes |
| |
|
| SAFETY |
|
| Withstand Voltage |
I/P-O/P: 3KVACI/P-FG: 1.5KVACO/P-FG: 0.5KVAC |
| Isolation Resistance |
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC |
| |
|
| STANDARD |
|
| Safety Standard |
Design refer to UL1012, UL1950，TUV EN60950 |
| EMC Standard |
Design refer to EN55022，EN61000-3-2，-3，EN61000-4-2，3，4，5，6，8，11；ENV50204，EN55024 |
| |
|
| OTHERS |
|
| Weight |
0.51Kg |
| Packing |
24pcs/13.1Kg/0.7CUFT |
| |
|
| NOTE |
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. |
| |
2.Ripple & noise are measured at 20MHz of bandwidth by using a 12″twisted pair-wire terminated with a 0.1μ &47μ
parallel capacitor. |
| |
3.Tolerance: includes set up tolerance, line regulation and load regulation |
| |
4.The power supply is considered a component which will be installed into a final equipment. The final equipment must
be re-confirmed that it still meets EMC directives.
|
| |
|
| OUTPUT |
|
High efficiency, high reliability