| SPECIFICATIONS |
|
| |
|
| INPUT |
|
| Voltage Range |
85～264 VAC/ 47～63 Hz；120～370VDC |
| AC Current |
2A/115 V1A/ 230 V |
| Efficiency |
75%
|
| Inrush Current |
Cold start 30A/115V60A/230V |
| Leakage Current |
＜3.5mA/240VAC |
| |
|
| OUTPUT |
See Datasheet |
| |
|
| PROTECTION |
|
| Over Load |
105%～150% |
| |
Protection type: hiccup mode, recovers automatically after fault condition is removed. |
| Over Voltage |
115%~135% |
| |
Protection type: hiccup mode, recovers automatically after fault condition is removed. |
| |
|
| ENVIRONMENT |
|
| Working Temp., Humidity |
-10℃～+50℃；20%～90 %RH |
| Storage Temp., Humidity |
-20℃～+85℃；10%～95 %RH |
| Vibration |
10～500Hz，2G 10min./1cycle, period for 60min, each along X, Y, Z axes |
| |
|
| SAFETY |
|
| Withstand Voltage |
I/P-O/P: 3KVACI/P-FG: 1.5KVACO/P-FG: 0.5KVAC |
| Isolation Resistance |
I/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC |
| |
|
| STANDARD |
|
| Safety Standard |
Design refer to UL1012 , UL60950 ,EN60950 |
| EMC Standard |
Design refer to EN55022(CLSPR22),EN61000-3-2,-3, EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024 |
| |
|
| OTHERS |
|
| Weight |
0.54Kg |
| Packing |
24pcs/13.8Kg/0.75CUFT |
| |
|
| NOTE |
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. |
| |
2.Ripple & noise are measured at 20MHz of bandwidth by using a 12″twisted pair-wire terminated with a 0.1μ &47μ
parallel capacitor. |
| |
3.Tolerance: includes set up tolerance, line regulation and load regulation. |
| |
4.The power supply is considered a component which will be installed into a final equipment. The final equipment must
be re-confirmed that it still meets EMC directives. |
| |
|
| OUTPUT |
|
High efficiency, high reliability