| SPECIFICATIONS |
|
| |
|
| INPUT |
|
| Voltage Range |
90～264VAC47～63 Hz； selected by switch 127～370VDC |
| Power Factor |
PF>0.96/230VACPF>0.99/115VAC at full load |
| AC Current |
8.8A/115 VAC4.2A/230VAC |
| Efficiency |
81%（HSP-750-5); 86%（HSP-750-12);
87%（HSP-750-15);
89%（HSP-750-24); 89%（HSP-750-27); 90%（HSP-750-48);
|
| Inrush Current |
27A/115VAC45A/230VAC |
| Leakage Current |
<2mA/240VAC |
| |
|
| OUTPUT |
See Datasheet |
| |
|
| PROTECTION |
|
| Over Load |
105%~125% |
| |
Protection type: Constant current limiting, hiccup mode after 3s,recovers automatically after fault condition is removed |
| Over Voltage |
115%~135% |
| |
Protection type: Shut down o/p voltage, re-power onto recover |
| Over Temp. |
TSW1（Power transistor）When Temp. in 85±5 ℃, shut down o/p voltage, Temp.＜85±5 ℃ auto-recovery |
| |
|
| ENVIRONMENT |
|
| Working Temp., Humidity |
-20℃～+60℃，20%～90 %RH |
| Storage Temp., Humidity |
-40℃～+85℃，10%～95 %RH |
| Vibration |
10～500Hz，2G 10min./1cycle, period for 60min, X, Y, Z axes |
| |
|
| SAFETY |
|
| Withstand Voltage |
I/P-O/P: 3KVACI/P-FG: 1.5KVACO/P-FG: 0.5KVAC |
| Isolation Resistance |
I/P-O/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC |
| |
|
| STANDARD |
|
| Safety Standard |
Design refer to UL60950-1,TUV EN60950-1 |
| EMC Standard |
Design refer to EN55011,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11;ENV50204,EN55024,EN61000-6-2,EN61204-3 |
| |
|
| OTHERS |
|
| Weight |
2.9Kg |
| Packing |
6pcs/18.4g/0.98CUFT |
| |
|
| NOTE |
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. |
| |
2.Ripple & noise are measured at 20MHz of bandwidth by using a 12″twisted pair-wire terminated with a 0.1μ &47μ
parallel capacitor. |
| |
3.Tolerance: includes set up tolerance, line regulation and load regulation. |
| |
4.The power supply is considered a component which will be installed into a final equipment. The final equipment must
be re-confirmed that it still meets EMC directives. |
| |
|
| OUTPUT |
|
Uniersal AC input/ full range