|
|
||||||||||||
Unversal AC input/ full range
| SPECIFICATIONS | |
| INPUT | |
| Voltage Range | 88～264VAC120～370VDCfrequency:47～63 Hz |
| Power Factor | PF>0.95/230VAC,PF>0.98/115VAC at full load |
| AC Current | 4A/115 VAC2A/230VAC |
| Efficiency | 75%（HSP-300-5); 80%（HSP-300-7.5);
83%（HSP-300-12);
83%（HSP-300-13.5); 83%（HSP-300-15); 85%（HSP-300-24); 85%（HSP-300-27); 85%（HSP-300-48); |
| Inrush Current | 18A/115VAC36A/230VAC |
| Leakage Current | ＜2 mA/240VAC |
| OUTPUT | See Datasheet |
| PROTECTION | |
| Over Load | 105%~135% |
| Protection type: 105%~135% constant current>135%, shut down o/p voltage, recovers automatically after fault condition is removed | |
| Over Voltage | 5.65-6.75（HSP-300-5); 9.4-10.9（HSP-300-7.5); 13.8-16.2（HSP-300-12); 15.5-18.2（HSP-300-13.5); 18-21（HSP-300-15); 27.6-32.4（HSP-300-24); 33.7-39.2（HSP-300-27); 57.6-67.2（HSP-300-48); |
| Protection type: Shut down o/p voltage, re-power on to recover | |
| Over Temp. | TSW1（Power transistor）When Temp. in 80±5 ℃（70℃±5 ℃5V）, shut down o/p voltage, |
| Temp.＜65±5 ℃（55℃±5 ℃5V）, O/I auto-recovery. | |
| ENVIRONMENT | |
| Working Temp., Humidity | -20℃～+65℃；20%～90 %RH |
| Storage Temp., Humidity | -40℃～+85℃；10%～95 %RH |
| Vibration | 10～500Hz，2G 10min./1cycle, period for 60min, each along X, Y, Z axes |
| SAFETY | |
| Withstand Voltage | I/P-O/P: 3KVACI/P-FG: 1.5KVACO/P-FG: 0.5KVAC |
| Isolation Resistance | I/P-O/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC |
| STANDARD | |
| Safety Standard | Design refer to UL60950,TUV EN60950 |
| EMC Standard | Design refer to EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11;ENV50204,EN55024 |
| OTHERS | |
| Weight | 1.1Kg |
| Packing | 12pcs/14.0Kg/0.98CUFT |
| NOTE | 1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. |
| 2.Ripple & noise are measured at 20MHz of bandwidth by using a 12″twisted pair-wire terminated with a 0.1μ &47μ parallel capacitor. |
|
| 3.Tolerance: includes set up tolerance, line regulation and load regulation. | |
| 4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. |
|
| OUTPUT |
| Model | HSP-300- |
|||||||
| 5 | 7.5 | 12 | 13.5 | 15 | 24 | 27 | 48 | |
| DC Voltage | 5V | 7.5V | 12V | 13.5V | 15V | 24V | 27V | 48V |
| Voltage Tolerance | ±2% | ±2% | ±1% | ±1% | ±1% | ±1% | ±1% | ±1% |
| Rated Current | 50A | 34A | 24A | 21A | 19A | 12.5A | 11A | 6.25A |
| Current Range | 0－50A | 0－34A | 0－24A | 0－21A | 0－19A | 0－12.5A | 0－11A | 0－6.25A |
| Rated Power | 250W | 255W | 288W | 285W | 285W | 300W | 297W | 300W |
| Ripple & Noise | 150mVp-p | 150mVp-p | 150mVp-p | 150mVp-p | 150mVp-p | 150mVp-p | 200mVp-p | 240mVp-p |
| DC Adjustment Range | 4.5-5.7V | 6-9V | 10-13.2 | 12-15V | 13.5-18V | 20-26.4 | 26-32V | 41-56V |
| Setup,Rise,Hold Time | 800ms,50ms,16ms/230VAC2500ms,50ms,16ms/115VAC at full load | |||||||