| SPECIFICATIONS |
|
| |
|
| INPUT |
|
| Voltage Range |
85～264 VAC47-63Hz；120～370VDC |
| Power Factor |
PF>0.93/230VAC,PF>0.98/115VAC at full load |
| AC Current |
1.7A/115 VAC0.8A/230VAC |
| Efficiency |
70%（HSP-100-3.3); 76%（HSP-100-5); 78%（HSP-100-7.5);
80%（HSP-100-12);
80%（HSP-100-13.5);
82%（HSP-100-15); 84%（HSP-100-24); 83%（HSP-100-27); 82%（HSP-100-48);
|
| Inrush Current |
Cold start 40A/230VAC |
| Leakage Current |
<2mA/240VAC |
| |
|
| OUTPUT |
See Datasheet |
| |
|
| PROTECTION |
|
| Over Load |
105%~150% |
| |
Protection type: Constant current limiting, recovers automatically after fault condition is removed |
| Over Voltage |
115%～135% |
| |
Protection type: Shut down o/p voltage, re-power on to recover |
| |
|
| Function |
|
| Remote Control(Optional) |
CN1:4 ~ 10VDC POWER ON, <0 ~ 0.8VDC POWER OFF |
| |
|
| ENVIRONMENT |
|
| Working Temp., Humidity |
-10℃～+60℃；20%～90 %RH |
| Storage Temp., Humidity |
-20℃～+85℃；10%～95 %RH |
| Vibration |
10～500Hz，2G 10min./1cycle, period for 60min, each along X, Y, Z axes |
| |
|
| SAFETY |
|
| Withstand Voltage |
I/P-O/P: 3KVACI/P-FG: 1.5KVACO/P-FG: 0.5KVAC |
| Isolation Resistance |
I/P-O/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC |
| |
|
| STANDARD |
|
| Safety Standard |
Design refer to UL1950,TUV EN60950 |
| EMC Standard |
EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11;ENV50204,EN55024 |
| |
|
| OTHERS |
|
| Weight |
0.6Kg |
| Packing |
20pcs/12.0Kg/1.17CUFT |
| |
|
| NOTE |
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. |
| |
2.Ripple & noise are measured at 20MHz of bandwidth by using a 12″twisted pair-wire terminated with a 0.1μ &47μ
parallel capacitor. |
| |
3.Tolerance: includes set up tolerance, line regulation and load regulation. |
| |
4.The power supply is considered a component which will be installed into a final equipment. The final equipment must
be re-confirmed that it still meets EMC directives. |
| |
|
| OUTPUT |
|
Universal AC input/ full range 