Company
Product
Contact
Chinese
600W Parallel (N+1) With PFC Function(HSCP-600)  
Features:  
INPUT voltage range: AC180~260V
PF>0.98@230VAC
Protections: Short circuit/ Over load/ Over voltage/ Over   temperature
Built-in remote ON-OFF control and remote sense function
Power good signal
With parallel function(N+1)
Can adjust from 20%~100% output voltage by external   control 1-5V
Forced air cooling by built-in DC fan
3 years warrantyDimensions: 290*120*68mm(L*W*H)		  
Data

   Short Form Datasheet
  CE- Cerfiticate
 
SPECIFICATIONS  
   
INPUT  
Voltage Range 180～260VAC 47～63 Hz；selected by switch 260～370VDC
AC Current 5.0A/ 230 VAC
Efficiency 80%（HSCP-600-5);     82%（HSCP-600-9);    84%（HSCP-600-12);  85%（HSCP-600-15); 86%（HSCP-600-18);  
89%（HSCP-600-24);   89%（HSCP-600-36);   90%（HSCP-600-48); 90%（HSCP-600-60);
Inrush Current 60A/230V
Leakage Current 3.5 mA/240VAC
   
OUTPUT See Datasheet
   
PROTECTION  
Over Load 105%～115%
  Protection type: Current limiting, delay shut down o/p voltage, re-power on to recover
Over Voltage 110%~135%
  Protection type: Shut down o/p voltage, re-power on to recover
Over Temp. TSW1（Power transistor）When Temp. >100 ℃, shut down o/p voltage.Temp.＜100 ℃, O/I auto-recovery
   
ENVIRONMENT  
Working Temp., Humidity -20℃～+65℃，20%～90 %RH
Storage Temp., Humidity -20℃～+85℃，10%～95 %RH
Vibration 10～200Hz，2G 10min./1cycle, period for 60min, each along X, Y, Z axes
   
SAFETY  
Withstand Voltage I/P-O/P:3KVACI/P-FG:1.5KVACO/P-FG:0.5KVAC
Isolation Resistance I/P-O/P, I/P-FG, O/P-FG :100M Ohms / 500VDC
   
STANDARD  
Safety Standard Design refer to UL60950,TUV EN60950
EMC Standard Design refer to EN55022,EN61000-3-2,3, EN61000-4-2,3,4,5,6,8,11
   
OTHERS  
Weight 2.3Kg;
Packing 8pcs/20kg/CARTON
   
NOTE 1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
  2.Ripple & noise are measured at 20MHz of bandwidth by using a 12″twisted pair-wire terminated with a 0.1μ &47μ
   parallel capacitor.
  3.Tolerance: includes set up tolerance, line regulation and load regulation.
  4.Current limiting 3 times(1.5s,3.0s,5.0s)Then intelligent auto recovery before shut down
  5.The power supply is considered a component which will be installed into a final equipment. The final equipment must
   be re-confirmed that it still meets EMC directives.
   
OUTPUT  
 
HSCP-600
Model 5 9 12 15 18 24 36 48 60
DC Voltage 5V 9V 12V 15V 18V 24V 36V 48V 60V
Voltage Tolerance ±1.5% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0%
Rated Current 100A 66A 50A 40A 33A 25A 16A 12A 10A
Current Range 0－100A 0－66A 0－50A 0－40A 0－33A 0－25A 0－16A 0－12A 0－10A
Rated Power 500W 594W 600W 600W 600W 600W 500W 576W 600W
Ripple & Noise 100mVp-p 100mVp-p 120mVp-p 150mVp-p 180mVp-p 240mVp-pp 360mVp-p 480mVp-p 500mVp-p
DC Adjustment Range

Can adjust from 20%~100% output voltage by external control 1-5V
Setup,Rise,Hold Time 500ms, 250ms, 16ms at full load