Company
Product
Contact
Chinese
2400W Parallel Type With PFC Function(HSCP-2K4)  
Features:  
AC input 180~260VAC, 3Ф3 wire
AC 220V, 1Ф or 380V, 3Ф4 wire (Option)
PF>0.98 @ 230VACProtections: Short circuit/ Over load/   Over voltage/ Over temperature
Built-in remote ON-OFF control and remote sense function
  With good signal
With parallel function（N+1）
Can adjust from 20%~100% output voltage by external   control 1-5V
Forced air cooling by built-in DC fan
3 years warrantyDimension: 350*212*124mm(L*W*H) 		 
Data

   Short Form Datasheet
  CE- Cerfiticate
 
SPECIFICATIONS  
   
INPUT  
Voltage Range 180～260VAC3Ф4 wire, 47～63 Hz
AC Current 15A/ 230 VAC
Efficiency 83%（HSCP-2K4-9);     84%（HSCP-2K4-12);    85%（HSCP-2K4-15);  86%（HSCP-2K4-18);
88%（HSCP-2K4-24);   88%（HSCP-2K4-36);   89%（HSCP-2K4-48);   89%（HSCP-2K4-60);
Inrush Current 60A/230V
Leakage Current 3.5 mA/240VAC
   
OUTPUT See Datasheet
   
PROTECTION  
Over Load 110%～140%
  Protection type: Current limiting, delay shut down o/p voltage, re-power on to recover
Over Voltage 110%~135%
  Protection type: Shut down o/p voltage, re-power on to recover
Over Temp. TSW1（Power transistor）When Temp.>100 ℃, shut down o/p voltage, Temp.＜100 ℃, O/Iauto –revovery.
   
ENVIRONMENT  
Working Temp., Humidity -20℃～+65℃，20%～90 %RH
Storage Temp., Humidity -20℃～+85℃，10%～95 %RH
Vibration 10～200Hz，2G 10min./1cycle, period for 60min, each along X, Y, Z axes
   
SAFETY  
Withstand Voltage I/P-O/P:3KVACI/P-FG:1.5KVACO/P-FG:0.5KVAC
Isolation Resistance I/P-O/P, I/P-FG, O/P-FG :100M Ohms / 500VDC
   
STANDARD  
Safety Standard Design refer to UL60950,TUV EN60950 Approved
EMC Standard Design refer to EN55022,EN61000-3-2,3, EN61000-4-2,3,4,5,6,8,11
   
OTHERS  
Weight 9.0Kg;
Packing 1pcs/10kg/CARTON
   
NOTE 1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
  2.Ripple & noise are measured at 20MHz of bandwidth by using a 12″twisted pair-wire terminated with a 0.1μ &47μ
   parallel capacitor.
  3.Tolerance: includes set up tolerance, line regulation and load regulation.
  4.Current limiting 3 times(1.5s,3.0s,5.0s)Then intelligent auto recovery before shut down
  5.The power supply is considered a component which will be installed into a final equipment. The final equipment must
   be re-confirmed that it still meets EMC directives.
   
OUTPUT  
Model
HSCP-2K4
  9 12 15 18 24 36 48 60
DC Voltage 9V 12V 15V 18V 24V 36V 48V 60V
Voltage Tolerance ±2.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0%
Rated Current 266A 200A 160A 133A 100A 66A 50A 40A
Current Range 0－266A 0－200A 0－160A 0－133A 0－100A 0－66A 0－50A 0－40A
Rated Power 2400W 2400W 2400W 2400W 2400W 2400W 2400W 2400W
Ripple & Noise 90mVp-p 120mVp-p 150mVp-p 150mVp-p 150mVp-pp 200mVp-p 200mVp-p 200mVp-p
DC Adjustment Range

Can adjust from 20%~100% output voltage by external control 1-5V
Setup,Rise,Hold Time 800ms, 400ms, 12ms at full load