| SPECIFICATIONS |
|
| |
|
| INPUT |
|
| Voltage Range |
90～130VAC / 180～260 VAC47～63 Hz；selected by switch 260～370VDC |
| AC Current |
11 A/115 VAC 7.0A/ 230 VAC |
| Efficiency |
77%(HSCN-600-5); 80%(HSCN-600-12); 81%(HSCN-600-15); 82%(HSCN-600-18); 85%(HSCN-600-24); 87%(HSCN-600-48); |
| Inrush Current |
60A/230V |
| Leakage Current |
3.5 mA/240VAC |
| |
|
| OUTPUT |
See Datasheet |
| |
|
| PROTECTION |
|
| Over Load |
101~115%(HSCN-600-5); 110%～135%(HSCN-600-1); HSCN-600-15; (HSCN-600-18;HSCN-600-24; HSCN-600-48) |
| |
Protection type: Current limiting, delay shut down o/p voltage, re-power on
to recover |
| Over Voltage |
110%~135% |
| |
Protection type: Shut dwon o/p voltage, re-power on to recover |
| Over Temp. |
TSW1（Power transistor）When temp. >100 ℃, shut down o/p voltage, re-power on to recover |
| |
|
| |
|
| ENVIRONMENT |
|
| Working Temp., Humidity |
-10℃～+65℃，20%～90 %RH |
| Storage Temp., Humidity |
-20℃～+85℃，10%～95 %RH |
| Vibration |
10～200Hz，2G 10min./1cycle, period for 60min, each along X, Y, Z axes |
| |
|
| SAFETY |
|
| Withstand Voltage |
I/P-O/P, I/P-FG:1500VAC |
| Isolation Resistance |
I/P-O/P, I/P-FG, 100M Ohms / 500VDC |
| |
|
| STANDARD |
|
| Safety Standard |
Design refer to UL1950,CSA22.2,IEC60950 |
| EMC Standard |
Design refer to FCC Part 15 Class A |
| |
|
| OTHERS |
|
| Weight |
2.3Kg; |
| Packing |
8pcs/24.0kg/CARTON |
| |
|
| NOTE |
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. |
| |
2.Ripple & noise are measured at 20MHz of bandwidth by using a 12″twisted pair-wire terminated with a 0.1μ &47μ
parallel capacitor. |
| |
3.Tolerance: includes set up tolerance, line regulation and load regulation |
| |
4.The power supply is considered a component which will be installed into a final equipment. The final equipment must
be re-confirmed that it still meets EMC directives. |
| |
|
| OUTPUT |
|
