|
|
||||||||||||
| SPECIFICATIONS | |
| INPUT | |
| Voltage Range | 90～264 VAC47-63Hz；127～370VDC |
| Power Factor | 0.95/230VAC0.98/100VAC at full load |
| AC Current | 7A/115 VAC3.5A/230VAC |
| Efficiency | 76%(HPSP-500-5); 82%(HPSP-500-12);
82%(HPSP-500-13.5);
82%(HPSP-500-15); 84%(HPSP-500-24); 84%(HPSP-500-27); 86%(HPSP-500-48); |
| Inrush Current | Cold start 20A/115VAC40A/230VAC |
| Leakage Current | <1mA/240VAC |
| OUTPUT | See Datasheet |
| PROTECTION | |
| Over Load | 110%~125% |
| Protection type: Constant current limiting, recovers automatically after fault condition is removed | |
| Over Voltage | 115%～135% |
| Protection type: Shut down o/p voltage, re-power on to recover | |
| Over Temp. | RTH2≥95℃（Detect on heatsink of Q1,Q7 power transistor & L3 output choke |
| Protection type: Shut down o/p voltage, re-power on to recover | |
| ENVIRONMENT | |
| Working Temp., Humidity | -10℃～+60℃；20%～90 %RH |
| Storage Temp., Humidity | -20℃～+85℃；10%～95 %RH |
| Vibration | 10～500Hz，2G 10min./1cycle, period for 60min, each along X, Y, Z axes |
| SAFETY | |
| Withstand Voltage | I/P-O/P: 3KVACI/P-FG: 1.5KVACO/P-FG: 0.5KVAC |
| Isolation Resistance | I/P-O/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC |
| STANDARD | |
| Safety Standard | Design refer to UL1950,TUV EN60950 |
| EMC Standard | Design refer to EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11;ENV50204,EN55024 |
| OTHERS | |
| Weight | 2.6Kg |
| Packing | 6pcs/15.7Kg/1.45 CUFT |
| NOTE | 1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. |
| 2.Ripple & noise are measured at 20MHz of bandwidth by using a 12″twisted pair-wire terminated with a 0.1μ &47μ parallel capacitor. |
|
| 3.Tolerance: includes set up tolerance, line regulation and load regulation. | |
| 4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. |
|
| OUTPUT |
| Model | HPSP-500 |
||||||
| 5 | 12 | 13.5 | 15 | 24 | 27 | 48 | |
| DC Voltage | 5V | 12V | 13.5V | 15V | 24V | 27V | 48V |
| Voltage Tolerance | ±2% | ±1% | ±1% | ±1% | ±1% | ±1% | ±1% |
| Rated Current | 80A | 41.5A | 37A | 33A | 20.8A | 18.5A | 10.5A |
| Current Range | 0－80A | 0－41.5A | 0－37A | 0－33A | 0－20.8A | 0－18.5A | 0－10.5A |
| Rated Power | 400W | 498W | 499.5W | 495W | 499.2W | 499.5W | 504W |
| Ripple & Noise | 240mVp-p | 240mVp-p | 240mVp-p | 240mVp-p | 240mVp-p | 200mVp-p | 300mVp-p |
| DC Adjustment Range | -5%,+10% | -17%,+10% | ±11% | -10%,+20% | -17%,+10% | ±11% | -15%,+17% |
| Setup,Rise,Hold Time | 1500ms,50ms,15ms at full load | ||||||