|
|
||||||||||||
| SPECIFICATIONS | |
| INPUT | |
| Voltage Range | 90～264 VAC47-63Hz；127～370VDC |
| Power Factor | PF>0.95/230VAC PF>0.95/115VAC at full load |
| AC Current | 14A/115 VAC 7A/230VAC |
| Efficiency | 77%（HPSP-1000-5); 84%（HPSP-1000-12);
84%（HPSP-1000-13.5);
84%（HPSP-1000-15); 86%（HPSP-1000-24); 86%（HPSP-1000-27); 86%（HPSP-1000-48); |
| Inrush Current | Cold start 40A/115VAC70A/230VAC |
| Leakage Current | <2mA/240VAC |
| OUTPUT | See Datasheet |
| PROTECTION | |
| Over Load | 115%~140% |
| Protection type: Constant current limiting, recovers automatically after fault condition is removed | |
| Over Voltage | 115%～135% |
| Protection type: Shut down o/p voltage, re-power on to recover | |
| Over Temp. | 95 (TSW1) Detect on the heatsink of PFC MOSFET 90 (TSW2) Detect the winding of output choke |
| Protection type: Shut down o/p voltage, recovers automatically after temperature goes down | |
| ENVIRONMENT | |
| Working Temp., Humidity | -10℃～+65℃；20%～90 %RH |
| Storage Temp., Humidity | -20℃～+85℃；10%～95 %RH |
| Vibration | 10～500Hz，2G 10min./1cycle, period for 60min, each along X, Y, Z axes |
| SAFETY | |
| Withstand Voltage | I/P-O/P: 3KVACI/P-FG: 1.5KVACO/P-FG: 0.5KVAC |
| Isolation Resistance | I/P-O/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC |
| STANDARD | |
| Safety Standard | Design refer to UL1950,TUV EN60950 |
| EMC Standard | Design refer to EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11;ENV50204,EN55024 |
| OTHERS | |
| Weight | 5.2Kg |
| Packing | 3pcs/16.3Kg/1.42 CUFT |
| NOTE | 1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. |
| 2.Ripple & noise are measured at 20MHz of bandwidth by using a 12″twisted pair-wire terminated with a 0.1μ &47μ parallel capacitor. |
|
| 3.Tolerance: includes set up tolerance, line regulation and load regulation. | |
| 4.10% Duty cycle maximum within every 30 seconds(max.). Average output power should not exceed the rated power. | |
| 5.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. |
|
| OUTPUT |
| Model | HPSP-1000 |
||||||
| 5 | 12 | 13.5 | 15 | 24 | 27 | 48 | |
| DC Voltage | 5V | 12V | 13.5V | 15V | 24V | 27V | 48V |
| Voltage Tolerance | ±6.0% | ±3.0% | ±2.0% | ±2.0% | ±1.0% | ±1.0% | ±1.0% |
| Rated Current | 145A | 75A | 67A | 60A | 37.6A | 33.6A | 19A |
| Current Range | 0－145A | 0－75A | 0－67A | 0－60A | 0－37.6A | 0－33.6A | 0－19A |
| Rated Power | 725W | 900W | 904.5W | 900W | 902.4W | 907.2W | 912W |
| Peak Value Power | 800W | 1000W | 1000W | 1000W | 1000W | 1000W | 1000W |
| Ripple & Noise | 100mVp-p | 150mVp-p | 150mVp-p | 150mVp-p | 150mVp-p | 150mVp-p | 200mVp-p |
| DC Adjustment Range | -5%,+10% | -17%,+10% | ±11% | -10%,+20% | -17%,+10% | ±11% | -15%,+17% |
| Setup,Rise,Hold Time | 1.5s,50ms,15ms/230VAC1.5s,50ms,1.5ms/115VAC at full load | ||||||