| SPECIFICATIONS |
|
| |
|
| INPUT |
|
| Voltage Range |
90～264VAC47～440Hz，127~370VDC |
| AC Current |
0.8A/115VAC0.56A/230VAC |
| Efficiency |
69%(HPS-45-3.3); 74%(HPS-45-5); 75%(HPS-45-7.5); 76%(HPS-45-12); 77%(HPS-45-13.5);
77%(HPS-45-15); 78%(HPS-45-24); 78%(HPS-45-27); 78%(HPS-45-48);
|
| Inrush Current |
Cold start 15A/115VAC30A/230VAC |
| Leakage Current |
<0.75 mA/240VAC |
| |
|
| OUTPUT |
See Datasheet |
| |
|
| PROTECTION |
|
| Over Load |
53-75W（3.3V:36-55W）Fold back current limiting, recovers automatically after fault condition is removed |
| Over Voltage |
115%-135%Hiccup mode, recovers automatically after fault condition is removed |
| |
|
| ENVIRONMENT |
|
| Working Temp., Humidity |
-10℃～+60℃；20%～90 %RH |
| Storage Temp., Humidity |
-20℃～+85℃；10%～95 %RH |
| Vibration |
10～500Hz，2G 10min./1cycle, period for 60min, each along X, Y, Z axes |
| |
|
| SAFETY |
|
| Withstand Voltage |
I/P-O/P: 3KVACI/P-FG: 1.5KVACO/P-FG: 0.5KVAC |
| Isolation Resistance |
I/P-O/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC |
| |
|
| STANDARD |
|
| Safety Standard |
Design refer to UL60950, TUV EN60950-1 |
| EMC Standard |
Design refer to EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11;ENV50204,EN55024 |
| |
|
| OTHERS |
|
| Weight |
0.19Kg |
| Packing |
72pcs/15.6Kg/1.35CUFT |
| |
|
| NOTE |
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. |
| |
2.Ripple & noise are measured at 20MHz of bandwidth by using a 12″twisted pair-wire terminated with a 0.1μ & 47μ
parallel capacitor. |
| |
3.Tolerance: includes set up tolerance, line regulation and load regulation. |
| |
4.The power supply is considered a component which will be installed into a final equipment. The final equipment must
be re-confirmed that it still meets EMC directives. |
| |
|
| OUTPUT |
|
High efficiency, high reliability