| SPECIFICATIONS |
|
| |
|
| INPUT |
|
| Voltage Range |
85～264 VACselected by switch 47～63 Hz；120～370VDC |
| AC Current |
1.6 A/115 V 0.96A/ 230 V |
| Efficiency |
76%(HDR-75-12); 80%(HDR-75-24); 81%(HDR-75-48) |
| Inrush Current |
Cold start 20A/115V 40A/230V |
| Leakage Current |
＜1mA/240VAC |
| |
|
| OUTPUT |
See Datasheet |
| |
|
| PROTECTION |
|
| Over Load |
105%～150% |
| |
Protection type: Constant current limiting, recovers automatically after fault condition is removed |
| Over Voltage |
120%~140% |
| |
Protection type: Hiccup mode, recovers automatically after fault condition is removed |
| OVER TEMP. |
TSW1≥85℃±5℃时， |
| |
Protection type: Shut down o/p voltage, recovers automatically after temperature goes down |
| |
|
| ENVIRONMENT |
|
| Working Temp., Humidity |
10℃～+60℃；20%～90 %RH |
| Storage Temp., Humidity |
-20℃～+85℃；10%～95 %RH |
| Vibration |
10～500Hz，2G 10min./1cycle, period for 60min, each along X, Y, Z axes |
| |
|
| SAFETY |
|
| Withstand Voltage |
I/P-O/P: 3KVACI/P-FG: 1.5KVACO/P-FG: 0.5KVAC |
| Isolation Resistance |
I/P-O/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC |
| |
|
| STANDARD |
|
| Safety Standard |
Design refer to UL508,TUV EN60950-1 |
| EMC Standard |
EN55011,EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11,ENV50204,EN55024,EN61000-6-2 |
| |
|
| OTHERS |
|
| Weight |
0.6Kg |
| Packing |
20pcs/13Kg/1.1CUFT |
| |
|
| NOTE |
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. |
| |
2.Ripple & noise are measured at 20MHz of bandwidth by using a 12″twisted pair-wire terminated with a 0.1μ & 47μ
parallel capacitor. |
| |
3.Tolerance: includes set up tolerance, line regulation and load regulation. |
| |
4.The power supply is considered a component which will be installed into a final equipment. The final equipment must
be re-confirmed that it still meets EMC directives. |
| |
|
| OUTPUT |
|
