| SPECIFICATIONS |
|
| |
|
| INPUT |
|
| Voltage Range |
88～264 VAC47～63 Hz； selected by switch 124～370VDC |
| AC Current |
1.2A/115 V 0.8A/ 230 V |
| Efficiency |
76%(HDR-60-5); 82%(HDR-60-12); 83%(HDR-60-15); 81%(HDR-60-24) |
| Inrush Current |
Cold start 20A/115V 40A/230V |
| Leakage Current |
＜1mA/240VAC |
| |
|
| OUTPUT |
See Datasheet |
| |
|
| PROTECTION |
|
| Over Load |
105%～160% |
| |
Protection type: Constant current limiting, recovers automatically after fault condition is removed |
| Over Voltage |
115%~135% |
| |
Protection type: Shut down o/p voltage, re-power on to recover |
| |
|
| ENVIRONMENT |
|
| Working Temp., Humidity |
-20℃～+60℃；20%～90 %RH |
| Storage Temp., Humidity |
-40℃～+85℃；10%～95 %RH |
| Vibration |
10～500Hz，2G 10min./1cycle, period for 60min, each along X, Y, Z axes |
| |
|
| SAFETY |
|
| Withstand Voltage |
I/P-O/P: 3KVAC |
| Isolation Resistance |
I/P-O/P: 100M Ohms / 500VDC |
| |
|
| STANDARD |
|
| Safety Standard |
Design refer to UL60950-1,TUV EN60950-1,EN50178 |
| EMC Standard |
Design refer to EN55011,EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11,ENV50204,EN55024,EN61000-6-2，EN61204-3 |
| |
|
| OTHERS |
|
| Weight |
0.3Kg |
| Packing |
48pcs/15.4Kg/1.02CUFT |
| |
|
| NOTE |
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. |
| |
2.Ripple & noise are measured at 20MHz of bandwidth by using a 12″twisted pair-wire terminated with a 0.1μ & 47μ
parallel capacitor. |
| |
3.Tolerance: includes set up tolerance, line regulation and load regulation. |
| |
4.The power supply is considered a component which will be installed into a final equipment. The final equipment must
be re-confirmed that it still meets EMC directives. |
| |
|
| OUTPUT |
|
|
| Model |
HDR-60-5 |
HDR-60-12 |
HDR-60-15 |
HDR-60-24 |
| DC Voltage |
5V |
12V |
15V |
24V |
| Voltage Tolerance |
±2% |
±1% |
±1% |
±1% |
| Rated Current |
6.5A |
4.5A |
4A |
2.5A |
| Current Range |
0-6.5A |
0-4.5A |
0-4A |
0-2.5A |
| Rated Power |
32.5W |
54W |
60W |
60W |
| Ripple & Noise |
80mVp-p |
120mVp-p |
120mVp-p |
150mVp-p |
| DC Adjustment Range |
-5%,+10% |
-8%,+10% |
±10% |
±10% |
| Setup, Rise Time |
100ms,30ms/230VAC at full load200ms,30ms/115VAC at full load |
| Hold Time |
100ms/230VAC23ms/115VAC at full load |
| |
|
|
